sLED v2 CANON RC Shutter
sLED v2 is a unique, lightweight and robust Infrared RC shutter system for Canon DSLR machines.
You can use it for Video Start/Stop or Photo.
NEW sLED v2 SERIES
Previous sLED shutters were using 5mm standard IR LEDs to emitting the signals.
Our new sLED v2 boards are including onboard SMD IR LED for a lighter, better and stronger design.
You can also attach it to the IR window of your camera with sticky tape.
Weight: 4gr
Voltage: 3-7 volts
Current: 2mA
Cable Length: 30cm
Accepting Signal: 1-2ms PPM over servo line.
USING sLED
- Just plug it to your receivers' any empty channel.
- Use a 3 position switch, knob, stick or logical switch for controlling the modes.
- Configure your Canon for IR Remote.
You can find the remote control menu under the DRIVE button of your xxD or xD series machines.
If you are using the xxxD series machine-like 550D, you have to enable "video remote" mode from the MENU button when video mode selected.
Control Modes
Centre position: Idle mode of sLED
UP Position: Photo Shot (works on Photo or video modes)
DOWN Position: Video Start/Stop (or 2 seconds delay on photo mode)
Compatible Models:
Whole EOS series DSLR machines since 300D
EOS 1D
EOS 3D
EOS 5D (all models)
EOS 7D
EOS 50D
EOS 60D
EOS 550D
EOS 600D
EOS 1100D
EOS 300D, 300V, 300VQD, 300X, 350D (Rebel XT), 350D, 400D (Rebel XTi), 450 (Rebel XSi), 50/55, 10, 100, kiss III, kiss IIIL, EOS IX, IXUS jr/II/III, Sureshot, ELAN7, Rebel T1 Date, Rebel T2 Date, Z180u, Z155, Pro90 IS, 120, 370Z, G1, G2, G3, G4, G5, S70, S60, S1 IS, Pro 1
Note 1: Your model may not be included in the above list. Please check the manual of your camera to see whether it is compatible with IR video start/stop option. Our remote shutter compatible with RC-1 and RC-6 remote shutters of Canon.
Note 2: You should enable the "IR remote" mode from your CANON's video menu before using this device. You can find the remote control menu under the DRIVE button of your xxD or xD series machines. If you are using the xxxD series machines like 550D, you have to enable "video remote" mode from the MENU button when video mode selected.